Enabling internet sharing in Mikrotik Metal 2SHPn Now its time to enable internet sharing in Mikrotik Metal 2SHPn, First create a bridge which will connect the wlan and ether 1 with one another. Enter you security keys in WPA2 pre shared key In mode,select Dynamic Keys I would like to recommend WPA2 PSK security as it is very tight security. Security settings for Mikrotik Metal 2SHPn Goto Wireless,Click on security profile,Enter a profile name like WPA-2PSK security.

These are the Settings for Mikrotik Metal 2SHPns wireless.The other settings are same as in Mikrotik Groove a2hn. You can also change it Password from Quick setup.

Router Identity is the name of your Device,whenever you will discover it in DHCP Pool you will see its Identity name. Enter Ip address, Gateway and DNS according to your network scenario. Select Configuration mode to bridge Set your IP address to static so that your can configure it through web interface. and N mode gives you 150 Mbps throughput.(N mode will only work if you have channel width 40 Mhz) Set channel width to 20 Mhz if you want to connect 20Ghz enabled devices like Tl-Wa 500g,But 40Ghz is recomended.(But N mode will not work) Set channel width to 40 Mhz if you want more throughput.

Lets discuss it features At the top left corner, you can see a drop down menu, you can select the Mode, whether you want it for AP, Bridge or Client Here I am selecting it to AP as I am configuring it as Access Point Select your Network name in SSID field, In frequency,Select any of the 13 frequencies.(This is also called Channel,Use the channel which is not used by others.You can find others channels by clicking on SCAN) In Band, Set Band to 2Ghz B/G/N. Configure Mikrotik Metal 2SHPn as access point The First option in Mikrotik Metal 2SHPns interface is the Quick Set.The Quick Set feature allows you to set up your wireless very quickly.

Mikrotik metal 2shpn